List of Pre-Configured Resources¶
EPSRC¶
ARCHER¶
The EPSRC Archer Cray XC30 system (https://www.archer.ac.uk/)
- Resource label :
epsrc.archer
- Raw config :
epsrc.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : standard
sandbox : /work/`id -gn`/`id -gn`/$USER
access_schema : ssh
- Available schemas :
ssh
NCAR¶
YELLOWSTONE¶
The Yellowstone IBM iDataPlex cluster at UCAR (https://www2.cisl.ucar.edu/resources/yellowstone).
- Resource label :
ncar.yellowstone
- Raw config :
ncar.json
- Note : We only support one concurrent CU per node currently.
- Default values for ComputePilotDescription attributes:
queue : premium
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh
NERSC¶
HOPPER¶
The Nersc Hopper Cray XE6 (https://www.nersc.gov/users/computational-systems/hopper/)
- Resource label :
nersc.hopper
- Raw config :
nersc.json
- Note : In a fresh virtualenv, run ‘easy_install pip==1.2.1’ to avoid ssl errors.
- Default values for ComputePilotDescription attributes:
queue : debug
sandbox : /scratch/scratchdirs/$USER
access_schema : ssh
- Available schemas :
ssh
LRZ¶
SUPERMUC¶
The SuperMUC petascale HPC cluster at LRZ, Munich (http://www.lrz.de/services/compute/supermuc/).
- Resource label :
lrz.supermuc
- Raw config :
lrz.json
- Note : Default authentication to SuperMUC uses X509 and is firewalled, make sure you can gsissh into the machine from your registered IP address. Because of outgoing traffic restrictions your MongoDB needs to run on a port in the range 20000 to 25000.
- Default values for ComputePilotDescription attributes:
queue : test
sandbox : $HOME
access_schema : gsissh
- Available schemas :
gsissh, ssh
FUTUREGRID¶
SIERRA¶
The FutureGrid ‘sierra’ cluster (https://futuregrid.github.io/manual/hardware.html).
- Resource label :
futuregrid.sierra
- Raw config :
futuregrid.json
- Default values for ComputePilotDescription attributes:
queue : batch
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh
ALAMO¶
The FutureGrid ‘alamo’ cluster (https://futuregrid.github.io/manual/hardware.html).
- Resource label :
futuregrid.alamo
- Raw config :
futuregrid.json
- Default values for ComputePilotDescription attributes:
queue : short
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh
HOTEL¶
The FutureGrid ‘hotel’ cluster (https://futuregrid.github.io/manual/hardware.html).
- Resource label :
futuregrid.hotel
- Raw config :
futuregrid.json
- Note : Due to a broken MPI installation, ‘hotel’ is currently not usable as agents won’t start up / run properly.
- Default values for ComputePilotDescription attributes:
queue : batch
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh
INDIA¶
The FutureGrid ‘india’ cluster (https://futuregrid.github.io/manual/hardware.html).
- Resource label :
futuregrid.india
- Raw config :
futuregrid.json
- Default values for ComputePilotDescription attributes:
queue : batch
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh
RICE¶
DAVINCI¶
The DAVinCI Linux cluster at Rice University (https://docs.rice.edu/confluence/display/ITDIY/Getting+Started+on+DAVinCI).
- Resource label :
rice.davinci
- Raw config :
rice.json
- Note : DAVinCI compute nodes have 12 or 16 processor cores per node.
- Default values for ComputePilotDescription attributes:
queue : parallel
sandbox : $SHARED_SCRATCH/$USER
access_schema : ssh
- Available schemas :
ssh
BIOU¶
The Blue BioU Linux cluster at Rice University (https://docs.rice.edu/confluence/display/ITDIY/Getting+Started+on+Blue+BioU).
- Resource label :
rice.biou
- Raw config :
rice.json
- Note : Blue BioU compute nodes have 32 processor cores per node.
- Default values for ComputePilotDescription attributes:
queue : serial
sandbox : $SHARED_SCRATCH/$USER
access_schema : ssh
- Available schemas :
ssh
LOCAL¶
LOCALHOST¶
Your local machine.
- Resource label :
local.localhost
- Raw config :
local.json
- Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
- Default values for ComputePilotDescription attributes:
queue : None
sandbox : $HOME
access_schema : local
- Available schemas :
local, ssh
XSEDE¶
LONESTAR¶
The XSEDE ‘Lonestar’ cluster at TACC (https://www.tacc.utexas.edu/resources/hpc/lonestar).
- Resource label :
xsede.lonestar
- Raw config :
xsede.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : normal
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
STAMPEDE¶
The XSEDE ‘Stampede’ cluster at TACC (https://www.tacc.utexas.edu/stampede/).
- Resource label :
xsede.stampede
- Raw config :
xsede.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : normal
sandbox : $WORK
access_schema : ssh
- Available schemas :
ssh, gsissh
GORDON¶
The XSEDE ‘Gordon’ cluster at SDSC (http://www.sdsc.edu/us/resources/gordon/).
- Resource label :
xsede.gordon
- Raw config :
xsede.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : normal
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
TRESTLES¶
The XSEDE ‘Trestles’ cluster at SDSC (http://www.sdsc.edu/us/resources/trestles/).
- Resource label :
xsede.trestles
- Raw config :
xsede.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : normal
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
BLACKLIGHT¶
The XSEDE ‘Blacklight’ cluster at PSC (https://www.psc.edu/index.php/computing-resources/blacklight).
- Resource label :
xsede.blacklight
- Raw config :
xsede.json
- Note : Always set the
project
attribute in the ComputePilotDescription or the pilot will fail. - Default values for ComputePilotDescription attributes:
queue : batch
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
IU¶
BIGRED2¶
Indiana University’s HPC cluster (https://kb.iu.edu/d/bcqt).
- Resource label :
iu.bigred2
- Raw config :
iu.json
- Default values for ComputePilotDescription attributes:
queue : None
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
QUARRY¶
The Quarry Linux cluster at Indiana University (https://kb.iu.edu/d/avkx).
- Resource label :
iu.quarry
- Raw config :
iu.json
- Default values for ComputePilotDescription attributes:
queue : None
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh, gsissh
DAS4¶
FS2¶
The Distributed ASCI Supercomputer 4 (http://www.cs.vu.nl/das4/).
- Resource label :
das4.fs2
- Raw config :
das4.json
- Default values for ComputePilotDescription attributes:
queue : all.q
sandbox : $HOME
access_schema : ssh
- Available schemas :
ssh