List of Pre-Configured Resources

RESOURCE_YALE

GRACE_SSH

Grace is a shared-use facility within Yale’s Faculty of Arts and Sciences (FAS).

• Resource label : yale.grace_ssh
• Raw config : resource_yale.json
• Note :
• Default values for ComputePilotDescription attributes:

• queue         : shared
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

RESOURCE_VTARC_DT

STAMPEDE_SSH

The XSEDE ‘Stampede’ cluster at TACC (https://www.tacc.utexas.edu/stampede/).

• Resource label : vtarc_dt.stampede_ssh
• Raw config : resource_vtarc_dt.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $WORK
• access_schema : gsissh

• Available schemas : gsissh, ssh, go

RESOURCE_EPSRC

ARCHER_ORTE

The EPSRC Archer Cray XC30 system (https://www.archer.ac.uk/)

• Resource label : epsrc.archer_orte
• Raw config : resource_epsrc.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : standard
• sandbox       : /work/`id -gn`/`id -gn`/$USER
• access_schema : ssh

• Available schemas : ssh

ARCHER_APRUN

The EPSRC Archer Cray XC30 system (https://www.archer.ac.uk/)

• Resource label : epsrc.archer_aprun
• Raw config : resource_epsrc.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : standard
• sandbox       : /work/`id -gn`/`id -gn`/$USER
• access_schema : ssh

• Available schemas : ssh

RESOURCE_OSG

XSEDE-VIRT-CLUST

XSEDE OSG Virtual Cluster is a Condor pool overlay on top of OSG resources. (https://portal.xsede.org/OSG-User-Guide).

• Resource label : osg.xsede-virt-clust
• Raw config : resource_osg.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

CONNECT

OSG Connect. (https://osgconnect.net).

• Resource label : osg.connect
• Raw config : resource_osg.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

RESOURCE_CHAMELEON

CLOUD_VM_YARN

Your Chameleon Cloud VM.

• Resource label : chameleon.cloud_vm_yarn
• Raw config : resource_chameleon.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

RESOURCE_XSEDE

BRIDGES

The XSEDE ‘Bridges’ cluster at PSC (https://portal.xsede.org/psc-bridges/).

• Resource label : xsede.bridges
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $SCRATCH
• access_schema : gsissh

• Available schemas : gsissh, ssh, go

COMET_SPARK

The Comet HPC resource at SDSC ‘HPC for the 99%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

• Resource label : xsede.comet_spark
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : compute
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

BLACKLIGHT_SSH

The XSEDE ‘Blacklight’ cluster at PSC (https://www.psc.edu/index.php/computing-resources/blacklight).

• Resource label : xsede.blacklight_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

GREENFIELD

The XSEDE ‘Greenfield’ cluster at PSC (https://www.psc.edu/index.php/computing-resources/greenfield).

• Resource label : xsede.greenfield
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

LONESTAR_SSH

The XSEDE ‘Lonestar’ cluster at TACC (https://www.tacc.utexas.edu/resources/hpc/lonestar).

• Resource label : xsede.lonestar_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

STAMPEDE2_SSH

The XSEDE ‘Stampede’ cluster at TACC (https://www.tacc.utexas.edu/stampede/).

• Resource label : xsede.stampede2_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $WORK
• access_schema : gsissh

• Available schemas : gsissh, ssh

SUPERMIC_SPARK

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

• Resource label : xsede.supermic_spark
• Raw config : resource_xsede.json
• Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
• Default values for ComputePilotDescription attributes:

• queue         : workq
• sandbox       : /work/$USER
• access_schema : gsissh

• Available schemas : gsissh, ssh

WRANGLER_SSH

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

• Resource label : xsede.wrangler_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $WORK
• access_schema : gsissh

• Available schemas : gsissh, ssh, go

GORDON_SSH

The XSEDE ‘Gordon’ cluster at SDSC (http://www.sdsc.edu/us/resources/gordon/).

• Resource label : xsede.gordon_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

COMET_ORTELIB

The Comet HPC resource at SDSC ‘HPC for the 99%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

• Resource label : xsede.comet_ortelib
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : compute
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

COMET_SSH

The Comet HPC resource at SDSC ‘HPC for the 99%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

• Resource label : xsede.comet_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : compute
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

WRANGLER_SPARK

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

• Resource label : xsede.wrangler_spark
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $WORK
• access_schema : gsissh

• Available schemas : gsissh, ssh, go

SUPERMIC_ORTE

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

• Resource label : xsede.supermic_orte
• Raw config : resource_xsede.json
• Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
• Default values for ComputePilotDescription attributes:

• queue         : workq
• sandbox       : /work/$USER
• access_schema : gsissh

• Available schemas : gsissh, ssh

TRESTLES_SSH

The XSEDE ‘Trestles’ cluster at SDSC (http://www.sdsc.edu/us/resources/trestles/).

• Resource label : xsede.trestles_ssh
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

COMET_ORTE

The Comet HPC resource at SDSC ‘HPC for the 99%’ (http://www.sdsc.edu/services/hpc/hpc_systems.html#comet).

• Resource label : xsede.comet_orte
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : compute
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, gsissh

SUPERMIC_ORTELIB

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

• Resource label : xsede.supermic_ortelib
• Raw config : resource_xsede.json
• Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
• Default values for ComputePilotDescription attributes:

• queue         : workq
• sandbox       : /work/$USER
• access_schema : gsissh

• Available schemas : gsissh, ssh

WRANGLER_YARN

The XSEDE ‘Wrangler’ cluster at TACC (https://www.tacc.utexas.edu/wrangler/).

• Resource label : xsede.wrangler_yarn
• Raw config : resource_xsede.json
• Note : Always set the project attribute in the ComputePilotDescription or the pilot will fail.
• Default values for ComputePilotDescription attributes:

• queue         : hadoop
• sandbox       : $WORK
• access_schema : gsissh

• Available schemas : gsissh, ssh, go

SUPERMIC_SSH

SuperMIC (pronounced ‘Super Mick’) is Louisiana State University’s (LSU) newest supercomputer funded by the National Science Foundation’s (NSF) Major Research Instrumentation (MRI) award to the Center for Computation & Technology. (https://portal.xsede.org/lsu-supermic)

• Resource label : xsede.supermic_ssh
• Raw config : resource_xsede.json
• Note : Partially allocated through XSEDE. Primary access through GSISSH. Allows SSH key authentication too.
• Default values for ComputePilotDescription attributes:

• queue         : workq
• sandbox       : /work/$USER
• access_schema : gsissh

• Available schemas : gsissh, ssh

RESOURCE_STFC

JOULE_RUNJOB

The STFC Joule IBM BG/Q system (http://community.hartree.stfc.ac.uk/wiki/site/admin/home.html)

• Resource label : stfc.joule_runjob
• Raw config : resource_stfc.json
• Note : This currently needs a centrally administered outbound ssh tunnel.
• Default values for ComputePilotDescription attributes:

• queue         : prod
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

RESOURCE_DAS5

FS1_SSH

The Distributed ASCI Supercomputer 5 (http://www.cs.vu.nl/das5/).

• Resource label : das5.fs1_ssh
• Raw config : resource_das5.json
• Default values for ComputePilotDescription attributes:

• queue         : defq
• sandbox       : /var/scratch/$USER
• access_schema : ssh

• Available schemas : ssh

RESOURCE_RICE

DAVINCI_SSH

The DAVinCI Linux cluster at Rice University (https://docs.rice.edu/confluence/display/ITDIY/Getting+Started+on+DAVinCI).

• Resource label : rice.davinci_ssh
• Raw config : resource_rice.json
• Note : DAVinCI compute nodes have 12 or 16 processor cores per node.
• Default values for ComputePilotDescription attributes:

• queue         : parallel
• sandbox       : $SHARED_SCRATCH/$USER
• access_schema : ssh

• Available schemas : ssh

BIOU_SSH

The Blue BioU Linux cluster at Rice University (https://docs.rice.edu/confluence/display/ITDIY/Getting+Started+on+Blue+BioU).

• Resource label : rice.biou_ssh
• Raw config : resource_rice.json
• Note : Blue BioU compute nodes have 32 processor cores per node.
• Default values for ComputePilotDescription attributes:

• queue         : serial
• sandbox       : $SHARED_SCRATCH/$USER
• access_schema : ssh

• Available schemas : ssh

RESOURCE_LUMC

GB-UI_SSH

LUMC node of Life Science Grid (LSG) (http://doc.grid.surfsara.nl/en/latest/Pages/General/life_science_grid.html).

• Resource label : lumc.gb-ui_ssh
• Raw config : resource_lumc.json
• Note :
• Default values for ComputePilotDescription attributes:

• queue         : medium
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, local

SHARK_SSH

Shark Cluster at LUMC (https://git.lumc.nl/shark/SHARK/wikis/home).

• Resource label : lumc.shark_ssh
• Raw config : resource_lumc.json
• Note : Need to specify at least 16GB for the pilot agent to start (pd.memory=16000).
• Default values for ComputePilotDescription attributes:

• queue         : all.q
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, local

RESOURCE_ORNL

RHEA

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/rhea/)

• Resource label : ornl.rhea
• Raw config : resource_ornl.json
• Note : Requires the use of an RSA SecurID on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $MEMBERWORK/`groups | cut -d' ' -f2`
• access_schema : local

• Available schemas : local, ssh, go

TITAN_ORTE

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

• Resource label : ornl.titan_orte
• Raw config : resource_ornl.json
• Note : Requires the use of an RSA SecurID on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $MEMBERWORK/`groups | cut -d' ' -f2`
• access_schema : local

• Available schemas : local

RHEA_APRUN

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

• Resource label : ornl.rhea_aprun
• Raw config : resource_ornl.json
• Note : Requires the use of an RSA SecurID on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $MEMBERWORK/`groups | cut -d' ' -f2`
• access_schema : local

• Available schemas : local

TITAN_APRUN

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

• Resource label : ornl.titan_aprun
• Raw config : resource_ornl.json
• Note : Requires the use of an RSA SecurID on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $MEMBERWORK/`groups | cut -d' ' -f2`
• access_schema : local

• Available schemas : local

TITAN_ORTELIB

The Cray XK7 supercomputer located at the Oak Ridge Leadership Computing Facility (OLCF), (https://www.olcf.ornl.gov/titan/)

• Resource label : ornl.titan_ortelib
• Raw config : resource_ornl.json
• Note : Requires the use of an RSA SecurID on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $MEMBERWORK/`groups | cut -d' ' -f2`
• access_schema : local

• Available schemas : local

RESOURCE_NCAR

YELLOWSTONE_SSH

The Yellowstone IBM iDataPlex cluster at UCAR (https://www2.cisl.ucar.edu/resources/yellowstone).

• Resource label : ncar.yellowstone_ssh
• Raw config : resource_ncar.json
• Note : We only support one concurrent CU per node currently.
• Default values for ComputePilotDescription attributes:

• queue         : premium
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

CHEYENNE

An SGI ICE XA Cluster located at the National Center for Atmospheric Research (NCAR), (https://www2.cisl.ucar.edu/resources/computational-systems/cheyenne)

• Resource label : ncar.cheyenne
• Raw config : resource_ncar.json
• Note : Requires the use of a token from an USB on every connection.
• Default values for ComputePilotDescription attributes:

• queue         : regular
• sandbox       : $TMPDIR
• access_schema : local

• Available schemas : local

RESOURCE_NCSA

BW_APRUN

The NCSA Blue Waters Cray XE6/XK7 system (https://bluewaters.ncsa.illinois.edu/)

• Resource label : ncsa.bw_aprun
• Raw config : resource_ncsa.json
• Note : Running ‘touch .hushlogin’ on the login node will reduce the likelihood of prompt detection issues.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : /scratch/sciteam/$USER
• access_schema : gsissh

• Available schemas : gsissh, local

BW_ORTELIB

The NCSA Blue Waters Cray XE6/XK7 system (https://bluewaters.ncsa.illinois.edu/)

• Resource label : ncsa.bw_ortelib
• Raw config : resource_ncsa.json
• Note : Running ‘touch .hushlogin’ on the login node will reduce the likelihood of prompt detection issues.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : /scratch/sciteam/$USER
• access_schema : gsissh

• Available schemas : gsissh

BW_CCM_SSH

The NCSA Blue Waters Cray XE6/XK7 system in CCM (https://bluewaters.ncsa.illinois.edu/)

• Resource label : ncsa.bw_ccm_ssh
• Raw config : resource_ncsa.json
• Note : Running ‘touch .hushlogin’ on the login node will reduce the likelihood of prompt detection issues.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : /scratch/sciteam/$USER
• access_schema : gsissh

• Available schemas : gsissh

BW_ORTE

The NCSA Blue Waters Cray XE6/XK7 system (https://bluewaters.ncsa.illinois.edu/)

• Resource label : ncsa.bw_orte
• Raw config : resource_ncsa.json
• Note : Running ‘touch .hushlogin’ on the login node will reduce the likelihood of prompt detection issues.
• Default values for ComputePilotDescription attributes:

• queue         : normal
• sandbox       : /scratch/sciteam/$USER
• access_schema : gsissh

• Available schemas : gsissh, local

RESOURCE_DAS4

FS2_SSH

The Distributed ASCI Supercomputer 4 (http://www.cs.vu.nl/das4/).

• Resource label : das4.fs2_ssh
• Raw config : resource_das4.json
• Default values for ComputePilotDescription attributes:

• queue         : all.q
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

RESOURCE_FUB

ALLEGRO_RSH

The FU Berlin ‘Allegro’ cluster at IMP (http://www.allegro.imp.fu-berlin.de).

• Resource label : fub.allegro_rsh
• Raw config : resource_fub.json
• Note : This one uses experimental RSH support to execute tasks.
• Default values for ComputePilotDescription attributes:

• queue         : micro
• sandbox       : $HOME/NO_BACKUP
• access_schema : ssh

• Available schemas : ssh

RESOURCE_IU

BIGRED2_APRUN

Indiana University’s Cray XE6/XK7 cluster (https://kb.iu.edu/d/bcqt).

• Resource label : iu.bigred2_aprun
• Raw config : resource_iu.json
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

BIGRED2_CCM_SSH

Indiana University’s Cray XE6/XK7 cluster in Cluster Compatibility Mode (CCM) (https://kb.iu.edu/d/bcqt).

• Resource label : iu.bigred2_ccm_ssh
• Raw config : resource_iu.json
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : /N/dc2/scratch/$USER
• access_schema : ssh

• Available schemas : ssh

RESOURCE_LRZ

SUPERMUC_SSH

The SuperMUC petascale HPC cluster at LRZ, Munich (http://www.lrz.de/services/compute/supermuc/).

• Resource label : lrz.supermuc_ssh
• Raw config : resource_lrz.json
• Note : Default authentication to SuperMUC uses X509 and is firewalled, make sure you can gsissh into the machine from your registered IP address. Because of outgoing traffic restrictions your MongoDB needs to run on a port in the range 20000 to 25000.
• Default values for ComputePilotDescription attributes:

• queue         : test
• sandbox       : $HOME
• access_schema : gsissh

• Available schemas : gsissh, ssh

RESOURCE_NERSC

HOPPER_CCM_SSH

The NERSC Hopper Cray XE6 in Cluster Compatibility Mode (https://www.nersc.gov/users/computational-systems/hopper/)

• Resource label : nersc.hopper_ccm_ssh
• Raw config : resource_nersc.json
• Note : For CCM you need to use special ccm_ queues.
• Default values for ComputePilotDescription attributes:

• queue         : ccm_queue
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh

EDISON_ORTE

The NERSC Edison Cray XC30 (https://www.nersc.gov/users/computational-systems/edison/)

• Resource label : nersc.edison_orte
• Raw config : resource_nersc.json
• Note :
• Default values for ComputePilotDescription attributes:

• queue         : regular
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh, go

HOPPER_ORTE

The NERSC Hopper Cray XE6 (https://www.nersc.gov/users/computational-systems/hopper/)

• Resource label : nersc.hopper_orte
• Raw config : resource_nersc.json
• Note :
• Default values for ComputePilotDescription attributes:

• queue         : regular
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh, go

HOPPER_APRUN

The NERSC Hopper Cray XE6 (https://www.nersc.gov/users/computational-systems/hopper/)

• Resource label : nersc.hopper_aprun
• Raw config : resource_nersc.json
• Note : Only one CU per node in APRUN mode
• Default values for ComputePilotDescription attributes:

• queue         : regular
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh

EDISON_CCM_SSH

The NERSC Edison Cray XC30 in Cluster Compatibility Mode (https://www.nersc.gov/users/computational-systems/edison/)

• Resource label : nersc.edison_ccm_ssh
• Raw config : resource_nersc.json
• Note : For CCM you need to use special ccm_ queues.
• Default values for ComputePilotDescription attributes:

• queue         : ccm_queue
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh

EDISON_APRUN

The NERSC Edison Cray XC30 (https://www.nersc.gov/users/computational-systems/edison/)

• Resource label : nersc.edison_aprun
• Raw config : resource_nersc.json
• Note : Only one CU per node in APRUN mode
• Default values for ComputePilotDescription attributes:

• queue         : regular
• sandbox       : $SCRATCH
• access_schema : ssh

• Available schemas : ssh, go

RESOURCE_LOCAL

LOCALHOST_SPARK_ANACONDA

Your local machine gets spark.

• Resource label : local.localhost_spark_anaconda
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_ORTELIB

Your local machine.

• Resource label : local.localhost_ortelib
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_SPARK

Your local machine gets spark.

• Resource label : local.localhost_spark
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_APRUN

Your local machine.

• Resource label : local.localhost_aprun
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST

Your local machine.

• Resource label : local.localhost
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_YARN

Your local machine.

• Resource label : local.localhost_yarn
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_ANACONDA

Your local machine.

• Resource label : local.localhost_anaconda
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

LOCALHOST_ORTE

Your local machine.

• Resource label : local.localhost_orte
• Raw config : resource_local.json
• Note : To use the ssh schema, make sure that ssh access to localhost is enabled.
• Default values for ComputePilotDescription attributes:

• queue         : None
• sandbox       : $HOME
• access_schema : local

• Available schemas : local, ssh

RESOURCE_FUTUREGRID

DELTA_SSH

FutureGrid Supermicro GPU cluster (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.delta_ssh
• Raw config : resource_futuregrid.json
• Note : Untested.
• Default values for ComputePilotDescription attributes:

• queue         : delta
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

XRAY_APRUN

FutureGrid Cray XT5m cluster (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.xray_aprun
• Raw config : resource_futuregrid.json
• Note : One needs to add ‘module load torque’ to ~/.profile on xray.
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : /scratch/$USER
• access_schema : ssh

• Available schemas : ssh

INDIA_SSH

The FutureGrid ‘india’ cluster (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.india_ssh
• Raw config : resource_futuregrid.json
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

XRAY_CCM

FutureGrid Cray XT5m cluster in Cluster Compatibility Mode (CCM) (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.xray_ccm
• Raw config : resource_futuregrid.json
• Note : One needs to add ‘module load torque’ to ~/.profile on xray.
• Default values for ComputePilotDescription attributes:

• queue         : ccm_queue
• sandbox       : /scratch/$USER
• access_schema : ssh

• Available schemas : ssh

ECHO_SSH

FutureGrid Supermicro ScaleMP cluster (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.echo_ssh
• Raw config : resource_futuregrid.json
• Note : Untested
• Default values for ComputePilotDescription attributes:

• queue         : echo
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

BRAVO_SSH

FutureGrid Hewlett-Packard ProLiant compute cluster (https://futuregrid.github.io/manual/hardware.html).

• Resource label : futuregrid.bravo_ssh
• Raw config : resource_futuregrid.json
• Note : Works only up to 64 cores, beyond that Torque configuration is broken.
• Default values for ComputePilotDescription attributes:

• queue         : bravo
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh

RESOURCE_RADICAL

TWO

radical server 2

• Resource label : radical.two
• Raw config : resource_radical.json
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, local

TUTORIAL

Our private tutorial VM on EC2

• Resource label : radical.tutorial
• Raw config : resource_radical.json
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, local

ONE

radical server 1

• Resource label : radical.one
• Raw config : resource_radical.json
• Default values for ComputePilotDescription attributes:

• queue         : batch
• sandbox       : $HOME
• access_schema : ssh

• Available schemas : ssh, local